# What Is E.164? The Phone Number Format | DialerBee

> E.164 is the ITU format for international phone numbers: a plus sign, country code and up to 15 digits. See why dialers, DNC lists and CRMs need it.

Canonical URL: https://dialerbee.com/glossary/what-is-e164/

---

Glossary November 2026 5 min read

## What Is E.164? The Phone Number Format

E.164 is the ITU format for international phone numbers: a plus sign, country code and up to 15 digits. See why dialers, DNC lists and CRMs need it.

D

[DialerBee Team](https://dialerbee.com/about/team/)

November 2026

Last updated November 7, 2026

Quick answer

E.164 is the ITU-T international numbering plan, and E.164 format means a phone number written as a plus sign, the country code and the national number with no spaces. The Recommendation limits the country code plus national number to 15 digits. Dialers, DNC lists and CRMs normalise to it so numbers match.

Phone numbers get written in dozens of ways: with spaces, brackets, dashes, a leading zero, a country prefix or none. Software cannot match, dial or de-duplicate numbers reliably until they are all in one shape. E.164 is that shape.

### The Definition

E.164 is an ITU-T Recommendation titled "The international public telecommunication numbering plan". The edition checked for this page is E.164 (02/2026), listed by the ITU as in force. It sets out the structure of international public telecommunication numbers and the digit analysis needed to route calls successfully. In everyday use, "E.164 format" means a number written in full international form: a plus sign, the country code, then the national number, with no spaces or punctuation. For example, a United Kingdom number starts +44, the country code the ITU lists for the UK, followed by the national digits, all run together.

### The Parts

- **Plus sign.** The leading plus stands in for the international prefix, the digits you dial to leave your own country, which differs from country to country. E.164 treats the international prefix as a separate term, and its clause on the international prefix says that, in line with ITU-T E.123, the symbol + is recommended to indicate that an international prefix is required. That is why writing a number with a local exit code instead of the plus sign causes confusion.
- **Country code.** For geographic areas, the ITU text says the country code is used to select the destination country and varies in length from one to three digits.
- **National (significant) number.** The remainder, which selects the destination subscriber within that country. Its structure is up to each country's numbering plan.

### The 15-Digit Maximum

The Recommendation says the maximum number of digits of the national (significant) number should be 15 minus n, where n is the number of digits in the country code. Put together, the country code plus the national number comes to at most 15 digits, not counting the international prefix. That is the source of the familiar rule that an E.164 number has no more than 15 digits. A number that exceeds it, or has far fewer digits than any real number could, is almost certainly a data-entry or import error.

### Why Dialers, DNC Lists and CRMs Normalise to E.164

- **Dialing.** A [SIP trunk](https://dialerbee.com/glossary/what-is-sip-trunk/) and the carrier behind it expect an unambiguous destination. A leading zero or a missing country code can send a call to the wrong place or nowhere.
- **Do-not-call matching.** A [DNC](https://dialerbee.com/glossary/what-is-dnc/) list only protects you if the number on the list and the number you dial are written the same way. A list in local format and a lead list in international format will not match.
- **De-duplication.** The same person entered as 0791..., 791... and +962791..., using Jordan's country code 962, looks like three different contacts until normalised.
- **Caller ID and DIDs.** The numbers you present and receive on, your [DIDs](https://dialerbee.com/glossary/what-is-did/) and your [caller ID](https://dialerbee.com/glossary/what-is-caller-id/), are most portable when held in the same form.

### E.164 in DialerBee: DNC Import Format

DialerBee's DNC import asks for a CSV or TXT file with one phone number per line in +E.164 format. According to the [guide to calling hours, DNC and consent rules](https://dialerbee.com/blog/how-to-set-calling-hours-dnc-and-consent-rules/), numbers are validated at 7 to 15 digits, so malformed rows are rejected at import instead of being dialled. If the import reports fewer numbers than the file held, re-export the list in E.164. The [compliance](https://dialerbee.com/features/compliance/) page describes the wider set of controls around calling rules and DNC.

### How to Use It

- **Normalise at the point of entry.** Convert numbers to E.164 when they enter your CRM or lead file, not at dial time.
- **Store the country code explicitly.** Never guess it from a leading zero.
- **Keep display and storage separate.** Show agents a friendly format, but store and match on E.164.

### Frequently Asked Questions

#### What is E.164 format?

A phone number written in full international form: a plus sign, the country code and the national number, with no spaces or punctuation. It is based on the ITU-T E.164 numbering plan.

#### How many digits can an E.164 number have?

At most 15 digits, covering the country code plus the national number, not counting the international prefix. The country code is 1 to 3 digits.

#### Is the plus sign part of E.164?

The plus sign is not one of the digits. E.164 defines the digits, and says that, in line with ITU-T E.123, the symbol + is recommended to indicate that an international prefix is required.

#### Why does my DNC import reject some rows?

DialerBee validates DNC numbers at 7 to 15 digits, so rows outside that range are rejected. Re-export the list in E.164 with one number per line.

#### Is E.164 the same as a DID?

No. E.164 is a number format. A DID is a number you own and receive calls on, which should be stored in E.164 form.

Related terms and guides: [DID](https://dialerbee.com/glossary/what-is-did/), [caller ID](https://dialerbee.com/glossary/what-is-caller-id/), [DNC](https://dialerbee.com/glossary/what-is-dnc/), [SIP trunk](https://dialerbee.com/glossary/what-is-sip-trunk/), [compliance](https://dialerbee.com/features/compliance/), [calling hours, DNC and consent rules](https://dialerbee.com/blog/how-to-set-calling-hours-dnc-and-consent-rules/).

### Sources

- [ITU-T E.164 (02/2026), The international public telecommunication numbering plan](https://www.itu.int/rec/T-REC-E.164) (edition and status; Recommendation text clauses 1, 6.1, 7.1, 7.2.1 and 15: scope, 15-digit maximum, country code length, 15 minus n, the + symbol) (source, checked November 7, 2026)
- [ITU, List of ITU-T Recommendation E.164 assigned country codes (position on 15 December 2016)](https://www.itu.int/dms_pub/itu-t/opb/sp/T-SP-E.164D-2016-PDF-E.pdf) (44 United Kingdom, 962 Jordan) (source, checked November 7, 2026)

Related terms

#### [What Is First Call Resolution (FCR)?](https://dialerbee.com/glossary/what-is-first-call-resolution/)

First call resolution is the share of contacts fully resolved on the first interaction. Learn the measurement methods, the definitions, and the trade-offs.

#### [What Is Grade of Service (GoS) in Telecom?](https://dialerbee.com/glossary/what-is-grade-of-service/)

Grade of service is the set of traffic-engineering measures, such as probability of loss and dial tone delay, used to judge if a group of lines is adequate.

#### [What Is IVR (Interactive Voice Response)?](https://dialerbee.com/glossary/what-is-ivr/)

IVR (interactive voice response) is an automated telephony system that greets callers with voice prompts and routes them using keypad or spoken input.

#### [What Is Jitter in VoIP?](https://dialerbee.com/glossary/what-is-jitter/)

Jitter is the variation in the arrival timing of voice packets. Learn how RTP measures it, what the formula means and how it affects call quality.

#### [What Is Latency in VoIP and Voice AI?](https://dialerbee.com/glossary/what-is-voip-latency/)

Latency is the delay between speaking and being heard. See what ITU-T G.114 says on one-way delay, how it differs from jitter, and why voice AI needs it low.

#### [What Is MOS (Mean Opinion Score)?](https://dialerbee.com/glossary/what-is-mos/)

MOS rates call audio quality from 1 to 5. Learn how it is estimated on live traffic, what drives a low score, and why per-call scores beat averages.

#### Ready to see DialerBee in action?

Request a 15-minute live demo, or start a 14-day free trial — no slides, no commitment. Calling starts once your own SIP trunk or PBX is connected and approved.

[Request a Demo](https://dialerbee.com/demo/) [Start free trial](https://dialerbee.com/trial/)

14-day free trial · free AI credit · no card · 11 languages · BYOC · compliance-supporting controls

[Back to all posts](https://dialerbee.com/blog/)
