Skip to content
Glossary November 2026 6 min read

What Is Answer Seizure Ratio (ASR)?

Answer seizure ratio (ASR) is a carrier-quality metric: the share of call attempts that are answered. See the SIP formula, an example and how to read it.

D
November 2026
Last updated

Quick answer

Answer seizure ratio (ASR) is the share of call attempts on a route that end in an answered call. RFC 6076 defines the SIP version, the Session Establishment Ratio (SER), as INVITE requests that receive a 200 OK divided by all INVITEs minus those answered with a 3XX redirect, times 100, and notes it is similar to the ASR defined in ITU-T E.411.

ASR is a common way to judge a carrier route. It answers a simple question about a route: of the calls attempted, how many were answered. It is also easy to misread, because the number mixes the quality of the route with the behaviour of the people being called.

The Definition

The International Telecommunication Union's Recommendation E.411 is the reference for the original telephone-network ratio. The ITU page lists the recommendation, its title (International network management - Operational guidance) and its versions, the version in force being E.411 (03/00) with Amendment 1 (03/01), but does not carry the definition in its page text, so the precise formula to use on a SIP network is the one the IETF published. RFC 6076 defines the Session Establishment Ratio (SER) and says directly that SER is similar to the Answer Seizure Ratio defined in ITU-T E.411.

The SER formula in RFC 6076 is the number of INVITE requests with an associated 200 OK, divided by the total number of INVITE requests minus the number that received a 3XX response, multiplied by 100. In plain terms, it counts the calls that were answered, out of the attempts, setting aside attempts that were only redirected elsewhere. It is measured at the originating user agent and expressed as a percentage.

How It Works

Every call attempt on a SIP trunk starts with an INVITE request. An answered call produces a 200 OK response, which is the signal that the other side accepted the session. Count those across a period for a route or a trunk, remove the attempts that were redirected with a 3XX response, and divide.

A Worked Example

This uses made-up round numbers for illustration. A trunk carries 1,000 call attempts in an hour. Twenty receive a 3XX redirect and 380 receive a 200 OK. The denominator is 1,000 minus 20, which is 980. Divide 380 by 980 and multiply by 100 for an ASR of about 38.8 percent. The remaining attempts ended some other way: not answered, busy, rejected, failed on the route.

Why It Matters for Outbound and Inbound Teams

For a team that connects its own carriers, ASR per trunk and per destination is how you compare routes with the same traffic. BYOC in DialerBee includes real-time monitoring of ASR, average call duration, post-dial delay and estimated MOS per trunk, so trunks can be compared side by side, and failover to a backup carrier can be set to trigger when quality drops below a configured threshold. The BYOC explainer covers how that fits into carrier choice.

For campaign performance, ASR is only one layer. It tells you what share of attempts were answered on the network, while connect rate and answer rate describe the same funnel from the campaign's side, where list quality, calling hours and the caller number shown all play a part.

How to Read It Without Fooling Yourself

  • A low ASR is not automatically a bad carrier. People not answering, switched-off phones and bad numbers all lower it. Compare routes on similar lists and times of day before blaming one.
  • Compare like with like. Calls to different destinations or at different hours have different natural answer levels.
  • Look at the shape over time. A sudden drop on one route while others hold steady is the useful signal.
  • Pair it with the effectiveness measure. The network effectiveness ratio counts busy and declined calls as network successes, which separates what the network did from what the person did.

Frequently Asked Questions

What is a good ASR?

There is no single figure that is good everywhere, because ASR depends on the destination, the list, the time of day and the calling pattern. Establish your own baseline per route over a few weeks and watch for departures from it rather than aiming for a universal number.

What is the difference between ASR and answer rate?

ASR is a network-side ratio computed from call attempts and answered signalling, usually per carrier route. Answer rate is the campaign-side share of dialed numbers that get answered. They measure related things from different places, and a campaign's list quality and timing affect both.

How is ASR calculated in SIP?

RFC 6076 gives the SIP equivalent, the Session Establishment Ratio: INVITEs with a 200 OK divided by all INVITEs minus those with a 3XX response, times 100. It states that this is similar to ASR in ITU-T E.411.

Why do two systems report different ASR for the same trunk?

Each may treat redirects, retries or short calls differently. Check how a report handles 3XX responses and whether it counts attempts or unique numbers before comparing figures from different tools.

Does ASR show call audio quality?

No. ASR counts answered attempts. Audio quality is measured separately, for example with MOS, jitter and packet loss.

Related terms and guides: connect rate, answer rate, network effectiveness ratio, BYOC, BYOC explained.

Sources

Related reading: SIP error codes on outbound calls: 403, 486, 503 and more · Post-Dial Delay (PDD)

Related reading: What Is a Call Detail Record (CDR)?

Related terms

Ready to see DialerBee in action?

Request a 15-minute live demo, or start a 14-day free trial — no slides, no commitment. Calling starts once your own SIP trunk or PBX is connected and approved.

14-day free trial · free AI credit · no card · 11 languages · BYOC · compliance-supporting controls