What Is Answer Seizure Ratio (ASR)?
Answer seizure ratio (ASR) is a carrier-quality metric: the share of call attempts that are answered. See the SIP formula, an example and how to read it.
Risposta rapida
Answer seizure ratio (ASR) is the share of call attempts on a route that end in an answered call. RFC 6076 defines the SIP version, the Session Establishment Ratio (SER), as INVITE requests that receive a 200 OK divided by all INVITEs minus those answered with a 3XX redirect, times 100, and notes it is similar to the ASR defined in ITU-T E.411.
ASR is a common way to judge a carrier route. It answers a simple question about a route: of the calls attempted, how many were answered. It is also easy to misread, because the number mixes the quality of the route with the behaviour of the people being called.
The Definition
The International Telecommunication Union's Recommendation E.411 is the reference for the original telephone-network ratio. The ITU page lists the recommendation, its title (International network management - Operational guidance) and its versions, the version in force being E.411 (03/00) with Amendment 1 (03/01), but does not carry the definition in its page text, so the precise formula to use on a SIP network is the one the IETF published. RFC 6076 defines the Session Establishment Ratio (SER) and says directly that SER is similar to the Answer Seizure Ratio defined in ITU-T E.411.
The SER formula in RFC 6076 is the number of INVITE requests with an associated 200 OK, divided by the total number of INVITE requests minus the number that received a 3XX response, multiplied by 100. In plain terms, it counts the calls that were answered, out of the attempts, setting aside attempts that were only redirected elsewhere. It is measured at the originating user agent and expressed as a percentage.
Come funziona
Every call attempt on a SIP trunk starts with an INVITE request. An answered call produces a 200 OK response, which is the signal that the other side accepted the session. Count those across a period for a route or a trunk, remove the attempts that were redirected with a 3XX response, and divide.
A Worked Example
This uses made-up round numbers for illustration. A trunk carries 1,000 call attempts in an hour. Twenty receive a 3XX redirect and 380 receive a 200 OK. The denominator is 1,000 minus 20, which is 980. Divide 380 by 980 and multiply by 100 for an ASR of about 38.8 percent. The remaining attempts ended some other way: not answered, busy, rejected, failed on the route.
Why It Matters for Outbound and Inbound Teams
For a team that connects its own carriers, ASR per trunk and per destination is how you compare routes with the same traffic. BYOC in DialerBee includes real-time monitoring of ASR, average call duration, post-dial delay and estimated MOS per trunk, so trunks can be compared side by side, and failover to a backup carrier can be set to trigger when quality drops below a configured threshold. The Spiegazione BYOC covers how that fits into carrier choice.
For campaign performance, ASR is only one layer. It tells you what share of attempts were answered on the network, while tasso di connessione E tasso di risposta describe the same funnel from the campaign's side, where list quality, calling hours and the caller number shown all play a part.
How to Read It Without Fooling Yourself
- A low ASR is not automatically a bad carrier. People not answering, switched-off phones and bad numbers all lower it. Compare routes on similar lists and times of day before blaming one.
- Compare like with like. Calls to different destinations or at different hours have different natural answer levels.
- Look at the shape over time. A sudden drop on one route while others hold steady is the useful signal.
- Pair it with the effectiveness measure. IL network effectiveness ratio counts busy and declined calls as network successes, which separates what the network did from what the person did.
Domande frequenti
What is a good ASR?
There is no single figure that is good everywhere, because ASR depends on the destination, the list, the time of day and the calling pattern. Establish your own baseline per route over a few weeks and watch for departures from it rather than aiming for a universal number.
What is the difference between ASR and answer rate?
ASR is a network-side ratio computed from call attempts and answered signalling, usually per carrier route. Answer rate is the campaign-side share of dialed numbers that get answered. They measure related things from different places, and a campaign's list quality and timing affect both.
How is ASR calculated in SIP?
RFC 6076 gives the SIP equivalent, the Session Establishment Ratio: INVITEs with a 200 OK divided by all INVITEs minus those with a 3XX response, times 100. It states that this is similar to ASR in ITU-T E.411.
Why do two systems report different ASR for the same trunk?
Each may treat redirects, retries or short calls differently. Check how a report handles 3XX responses and whether it counts attempts or unique numbers before comparing figures from different tools.
Does ASR show call audio quality?
No. ASR counts answered attempts. Audio quality is measured separately, for example with MOS, jitter and packet loss.
Related terms and guides: tasso di connessione, tasso di risposta, network effectiveness ratio, BYOC, BYOC explained.
Fonti
- RFC 6076, Basic Telephony SIP End-to-End Performance Metrics (section 4.6 Session Establishment Ratio, described there as similar to ASR in ITU-T E.411) (source, checked November 7, 2026)
- ITU-T E.411, International network management - Operational guidance (the page lists the title and versions; the definition itself is cited via RFC 6076) (source, checked November 7, 2026)
- RFC 3261, SIP: Session Initiation Protocol (source, checked November 7, 2026)
Letture correlate: SIP error codes on outbound calls: 403, 486, 503 and more · Post-Dial Delay (PDD)
Letture correlate: What Is a Call Detail Record (CDR)?
Termini correlati
What Is Automatic Speech Recognition (ASR)?
Automatic speech recognition (ASR) turns spoken audio into text. Learn how ASR works on phone calls, why phone audio is hard, and how accuracy is scored.
Che cos'è il tempo medio di gestione delle richieste (AHT, Average Handle Time)?
L'AHT è il tempo totale medio che un operatore dedica a un'interazione: conversazione, attesa e lavoro post-chiamata.
Che cos'è la velocità media di risposta (ASA)?
L'ASA è il tempo medio di attesa in coda prima che un operatore risponda. Scopri la formula, come differisce dal livello servizio e perché inganna.
What Is Barge-In in Voice AI and IVR?
Barge-in lets a caller cut into an IVR prompt or AI voice agent and be heard. See how it works, when to turn it off, and how it differs from supervisor barge.
Che cos'è Barge, Whisper and Listen?
Ascolto, sussurro e intervento sono i tre livelli di monitoraggio chiamate live per un supervisore. Cosa fa ciascuno e cosa vedono gli agenti.
Che cos'è BYOC (Bring Your Own Carrier)?
BYOC consente a un'azienda di collegare i propri trunk SIP e operatore a una piattaforma di comunicazione, anziché usare telefonia pacchettizzata.
Pronti a vedere DialerBee in azione?
Richiedi una demo dal vivo di 15 minuti oppure avvia una prova gratuita di 14 giorni: niente slide, nessun impegno. Le chiamate partono quando il tuo trunk SIP o PBX è collegato e approvato.
Prova gratuita di 14 giorni · credito IA gratuito · senza carta · 11 lingue · BYOC · controlli a supporto della conformità