انتقل إلى المحتوى
مسرد المصطلحات November 2026 6 قراءة دقيقة

ما هو SIP (بروتوكول بدء الجلسة)؟

SIP is the signalling protocol that sets up, changes and ends VoIP calls. Learn how a SIP call works, how it differs from RTP, and how dialers use it.

D
November 2026
آخر تحديث

إجابة سريعة

SIP, the Session Initiation Protocol, is the signalling protocol that creates, modifies and terminates VoIP calls. RFC 3261 defines it as an application-layer control protocol for sessions with one or more participants. A basic call is INVITE, ringing, 200 OK, ACK, then BYE to end it. The voice itself travels separately, over RTP.

Every VoIP call needs two things: a way to agree that a call is happening, and a way to carry the voice. SIP does the first job. It is the protocol that tells the other side "this person wants to talk to you", rings the phone, notices the answer and notices the hang-up. The voice itself travels separately, as described on the RTP page.

The Definition

RFC 3261, the core SIP specification, describes the Session Initiation Protocol as an application-layer control (signalling) protocol for creating, modifying and terminating sessions with one or more participants. The RFC says these sessions include Internet telephone calls, multimedia distribution and multimedia conferences.

Three further points from the same abstract matter for contact centres. SIP invitations carry session descriptions that let the participants agree on a set of compatible media types. SIP uses proxy servers to route requests to the user's current location, to authenticate and authorise users, and to apply a provider's call-routing policies. And SIP has a registration function, which lets a user upload their current location for use by proxy servers. In plain terms: a phone or platform registers, a proxy finds the destination, and the two ends agree how the audio will be exchanged.

How a SIP Call Is Set Up

RFC 3261 walks through a basic call in its overview. The sequence is short enough to remember:

  1. INVITE. The caller sends an INVITE to the callee's SIP address, usually through one or more proxies. Proxies answer with 100 Trying to show the request is being handled.
  2. 180 Ringing. The called phone is alerting, and the response travels back to the caller.
  3. 200 OK. The callee answers. The 200 OK carries the callee's session description, which completes the agreement on media.
  4. ACK. The caller confirms with an ACK. That completes the INVITE, 200 OK, ACK handshake. Audio now flows between the endpoints, separately from the signalling.
  5. BYE. Whoever hangs up sends a BYE, and the other side replies 200 OK. No ACK follows a BYE: the RFC says an ACK is only sent in response to a response to an INVITE.

When a call fails, the answer is a numbered response instead of a 200 OK. Those codes are what you read when a carrier rejects a call, and the guide to SIP error codes on outbound calls explains the common ones.

SIP vs RTP: Signalling vs the Voice Itself

A common confusion is "SIP vs VoIP". VoIP is the whole idea of voice over IP. SIP is one protocol inside it, the one that handles signalling. The audio is carried by RTP, which RFC 3550 describes as providing end-to-end delivery services for data with real-time characteristics, such as interactive audio and video. The two travel as separate streams, which is why a call can ring and connect perfectly and still have no sound in one direction. That symptom points at the media path rather than at SIP, and the one-way audio troubleshooting guide works through it.

SIP over UDP, TCP and TLS

RFC 3261 says SIP runs on top of several different transport protocols. Its transport section states that all SIP elements must implement UDP and TCP, and may implement other protocols. For encryption, a SIPS address guarantees secure, encrypted transport, namely TLS, from the caller to the callee's domain. The RFC gives the default port as 5060 for UDP and TCP, and 5061 for TLS. TLS protects the signalling only. Protecting the audio is a separate job, covered on the SRTP page.

How DialerBee Connects Over SIP

لا يربطك DialerBee بمزوّد اتصالات مجمّع. فصفحة التسعير تذكر أنه يمكنك ربط خطوط SIP الحالية لديك، مع إتاحة البنية التحتية للاتصالات الخاصة بـ DialerBee عبر فريق المبيعات، أما صفحة أحضر مشغّل الاتصالات الخاص بك (BYOC) فتذكر أنه إذا كان المزوّد يتعامل ببروتوكول SIP عبر UDP أو TCP أو TLS، فيمكن لـ DialerBee الاتصال به. يعمل معظم مزوّدي SIP؛ وبعض المزوّدين الذين تستخدمهم BroadNet أيضًا يُجرى إعدادهم مع فريقنا. وتُدخل بيانات اعتماد خط SIP الخاص بك في لوحة الإدارة، ويصف المنتج مراقبة سلامة الخطوط بمؤشرات ASR وACD وPDD. وإذا كنت تشغّل وحدة تحكم في حدود الجلسات (SBC) أو بوابة خاصة بك، فوجّه خطوطك إلى DialerBee عبر SIP.

How to Use It

  • Separate the two questions. "Did the call set up?" is SIP. "Can both sides hear?" is RTP.
  • Read the final response code. It tells you whether the carrier, the destination or your own configuration ended the attempt.
  • Check the transport with your provider. Ask whether they expect UDP, TCP or TLS, and on which port.

الأسئلة الشائعة

What does SIP stand for?

Session Initiation Protocol. RFC 3261 defines it as an application-layer signalling protocol for creating, modifying and terminating sessions.

What is the difference between SIP and VoIP?

VoIP is the general approach of carrying voice over IP networks. SIP is one protocol used within it, responsible for signalling: setting up, changing and ending the call.

Does SIP carry the voice?

No. SIP carries the signalling and a description of the session. The audio is carried by RTP, normally as a separate stream.

Which transports does SIP use?

UDP and TCP are required of all SIP elements by RFC 3261, and TLS is used for encrypted signalling. Providers differ in which they accept, so confirm with yours.

ما هو خط SIP ؟

A SIP trunk is the connection between a platform and a carrier that carries calls over SIP. The SIP trunk page in this glossary explains it in detail.

Related terms and guides: خط SIP, وحدة تحكم في حدود الجلسات (SBC), RTP, SRTP, voice codec, post-dial delay, DTMF, أحضر شركة الاتصالات الخاصة بك.

مصادر

مصطلحات ذات صلة

ما هو التوجيه القائم على المهارات؟

يُوجّه نظام التوجيه القائم على المهارات كل مكالمة واردة إلى وكيل يمتلك اللغة أو المنتج أو المؤهلات المناسبة. إليك كيفية عمله، ومزاياه وعيوبه، والبدائل المتاحة.

ما هو تحليل الكلام؟

تحوّل تحليلات الكلام نصوص المكالمات لبيانات قابلة للبحث: مشاعر، كلمات مفتاحية، ملخصات، ومؤشرات امتثال. كيف تعمل، وما يمكنها فعله وما لا يمكنها.

ما هو SRTP (بروتوكول RTP الآمن)؟

SRTP encrypts the voice in a VoIP call and protects it from tampering and replay. Learn how SRTP works with SIP over TLS and what to ask of a SIP trunk.

ما معنى STIR/SHAKEN ؟

STIR/SHAKEN هو إطار عمل لتحديد هوية المتصل يسمح لشركات الاتصالات بالتحقق من رقم المتصل. مستويات التحقق، والحدود، وما يعنيه ذلك بالنسبة للمكالمات الصادرة.

ما هو تحويل النص إلى كلام (TTS)؟

Text-to-speech turns written text into spoken audio. See how TTS is used in IVR prompts, voicemail drops and AI voice agents, and what affects how it sounds.

What Is the PSTN? Public Phone Network

The PSTN is the public switched telephone network behind ordinary phone calls. Learn how VoIP and SIP trunks reach it through gateways and why that matters.

هل أنت مستعد لرؤية تطبيق DialerBee أثناء العمل؟

اطلب عرضًا توضيحيًا مباشرًا مدته 15 دقيقة، أو ابدأ تجربة مجانية لمدة 14 يومًا — دون شرائح عرض، ودون أي التزام. يبدأ الاتصال بمجرد ربط خط SIP أو نظام PBX الخاص بك واعتماده.

تجربة مجانية لمدة 14 يومًا · رصيد ذكاء اصطناعي مجاني · بدون بطاقة · 11 لغة · BYOC · ضوابط داعمة للامتثال

← عرض الموقع كاملاً بالإنجليزية