Zum Inhalt springen
Industrie 19. November 2026 11 Mindestlesezeit

Dealer Recall and Service Reminder Calls

How dealership BDCs run recall and service reminder calls: a call flow modelled on a real OEM recall script, booking steps, retries and metrics to track.

D
19. November 2026

Kurze Antwort

A recall or service reminder call tells the owner what is due, checks that the owner and vehicle details are current, and books the visit. Manufacturers notify owners of safety recalls; dealers can follow up and book the repair. A good call identifies you, states what is due, confirms details, checks for other open recalls, then books or warm-transfers. Measure it with appointment set rate, show rate and completion.

A recall notice sitting unopened in a drawer does nothing. The repair only happens when the owner books it, and for some owners it takes a phone call from someone who sounds like they know the vehicle. That call is the work of the dealership BDC (business development centre) and the service department.

This guide gives you a call flow you can adapt, built on a real manufacturer outreach script, plus the retry plan, voicemail wording and the three formulas that tell you whether it is working. It is about process, not law: the rules for calling owners differ by country and by call type, so confirm yours before you dial.

Who notifies owners about a recall, and where does the dealer come in?

The manufacturer owns the recall. On its page for checking a vehicle recall, GOV.UK says that if a vehicle has a serious safety defect, "the manufacturer will write to you to tell you what to do", and that owners usually will not have to pay for repairs or parts (GOV.UK, checked 2026-11-19). The same page tells owners to get the car fixed or replaced by the manufacturer, and for serious safety defects it says the owner must not drive the vehicle.

Where does the dealer fit? Three places:

  • Booking. Owners need an appointment, a slot in the workshop and, often, a parts check.
  • Follow-up. Letters go unread and numbers change, so a call or message is the second touch.
  • Your own list. You may hold owners the manufacturer has not reached: vehicles you sold or service.

Owners can also look up a recall themselves. In the UK, GOV.UK runs a service to check whether a car has a safety recall using its registration number (GOV.UK, checked 2026-11-19). Find out which lookup your own market offers. A good call can mention it as a fallback, but it should not depend on it.

A recall outreach call flow modelled on a real manufacturer script

One manufacturer outreach script is public. The US safety regulator NHTSA hosts a document titled "Hyundai General Recall - Voicemail & Outreach Scripting" on its recall site (NHTSA, checked 2026-11-19). It is short, which is the point. It has two parts.

The voicemail

The script's voicemail names the team calling, says the call is about a safety recall on the owner's vehicle, says the manufacturer has decided a safety-related defect exists, and asks the owner not to delay. It then says the dealer will fix the recall at no cost, that the repair should take less than an hour but the dealer may need the vehicle longer depending on its schedule, and gives two ways to book: contact a local dealer, or call a toll-free number during stated hours.

The connected call

For a call that connects, the script gives three steps, in this order:

  1. Confirm owner information, and update the system if it differs. The listed fields are name, address, phone, email and vehicle status.
  2. Confirm whether there are any additional open recalls on the vehicle, and tell the owner.
  3. Warm transfer to the nearest authorised dealership for an appointment.

Two things are worth copying. First, the data check comes before the sales step, because every later message depends on a correct phone number and email. Second, the call ends in a handover to a person who can book, not in "please call us".

An adapted flow for a dealership BDC

A dealership usually books the visit itself rather than transferring, so adapt the third step. The flow below keeps the manufacturer's order and adds the pieces a dealership needs. The wording is illustrative: adjust it to your brand, market and the rules that apply to you.

StepWhat the agent doesIllustrative wording
1. IdentifyName, dealership, reason in one sentence"This is the service team at your dealership. I'm calling about a safety recall on your vehicle."
2. Confirm the personCheck you are speaking to the owner or the person who handles the car"Am I speaking with the owner of the vehicle ending in these last digits?"
3. State what is dueOne plain sentence, cost and time if you know them"The manufacturer has a repair due on it. It is free of charge and usually quick, and we will confirm the time when you book."
4. Confirm detailsName, address, phone, email, vehicle still owned. Update the record"Before I book, can I check we have your details right?"
5. Other open itemsCheck for other open recalls or due service and offer to do them in one visit"I can see one more item open. Would you like both done on the same visit?"
6. BookOffer two slots, read the booking back, send a message with the details"I can offer Tuesday morning or Thursday afternoon. Which suits you?"
7. Hand over if neededWarm transfer to the person who can book, with context, if you cannot"I'll put you through to our scheduler and tell her what we've covered."

If the owner says the car is not urgent, do not argue the safety message again. State the facts once, offer the earliest slot, record the outcome, and schedule the next touch. If the notice says the vehicle should not be driven, follow your manufacturer's instructions on what you say.

Service reminder calls: the same flow for maintenance due

The shape carries over to ordinary service. Only the opening and the offer change.

  • Maintenance due: "Your vehicle is due its scheduled service" replaces the safety statement. Offer the same two slots.
  • Declined work: reference what was advised at the last visit, in the customer's own terms, and offer to book it. Do not pressure.
  • First service: a welcome call a few weeks after delivery that explains what the first visit covers and books it.
  • Lapsed customer: a short call, a clear offer and an easy way to say no.

Treat the two kinds of call differently in your records. A safety recall is a notice about the owner's vehicle. A maintenance reminder is a commercial contact. Consent and marketing rules may treat them differently, so flag the call type on the campaign and check which rules apply.

What should the voicemail say?

When an owner call ends in voicemail, the message has to do the work. Use the structure of the manufacturer voicemail as a model:

  1. Who is calling (dealership and team).
  2. Warum (a recall or service is due on their vehicle), in one sentence.
  3. What it costs and how long it takes, only if you can state it truthfully for your brand and market.
  4. How to book: a phone number and, if you send one, a message with a booking link.
  5. A callback number said slowly, repeated once.

Keep it well under half a minute and do not put sensitive details on a machine other people may hear. A recorded message dropped when answering-machine detection hears a machine means every owner gets the same clear wording, and the agent moves on to the next call. See the voicemail drop page for how that works on DialerBee.

Retry plan and channel mix

The retry plan matters because a first attempt may not connect. Build it around dispositions rather than a fixed number of tries. Our guide to call retry strategy by disposition covers the logic in full. A starting point for a recall list, to test on your own data:

Outcome of the attemptNext action
No answer or busyRetry on a different day and a different time of day
Voicemail leftSend a message with a booking link; call again after a pause
Reached, asked to call backSchedule the callback for the time they named
Reached, not nowRecord the reason; follow up after the date they gave
Wrong number or disconnectedTry the other contact fields; flag the record for a data fix
Sold the carStop contact about this vehicle; update the owner record
Asked not to be calledStop and record it; use another permitted channel only if the rules allow
BookedConfirmation message now; reminder before the visit

On channel mix: a call, then a message, then a call is a rhythm worth testing against three calls in a row. A WhatsApp oder SMS message with the booking link lets the owner act at a time that suits them. Whether you may message a given owner depends on consent and the rules of your market, so set that up before the campaign, not after.

How do you measure it?

Three formulas, each with an explicit denominator. Report them side by side, because each one points to a different problem.

MetrischFormelWhat a low number points to
Appointment set rateAppointments booked / owners contactedThe call itself: wording, offer, slot availability
Show rateAppointments kept / appointments bookedConfirmation and reminders
CompletionRecall repairs completed / open recalls on your owner listReach: bad numbers, too few attempts, parts or workshop capacity

Worked example (illustrative numbers, not real results). Say a list holds 500 owners with an open recall. Agents reach 200 of them, book 80, and 60 keep their appointment. Appointment set rate is 80 / 200 = 40%. Show rate is 60 / 80 = 75%. Completion is 60 / 500 = 12%. The completion figure is the one the owner list is judged by, and it is low here mostly because only 200 of 500 owners were reached. That points to the contact rate and the retry plan before it points to the script.

Track the contact rate too (owners reached / owners dialled), and count by campaign and by call type so that recall and maintenance results are not mixed. Define "contacted" once and keep it fixed, or you will not be able to compare weeks.

How DialerBee supports dealership BDCs

DialerBee's Kfz-Wählgerät page lists recall and safety notification campaigns, service and maintenance reminder campaigns with retry logic and WhatsApp or SMS follow-up, and logged call outcomes. For booking, the appointments feature sends reminders by SMS, WhatsApp and email on a policy you set and includes a messages-sent report for whether reminders actually went out. The voicemail drop feature lets the agent drop a recorded template with one click when answering-machine detection hears a machine, and the warm transfer glossary entry explains the handover step.

Dealers configure consent, DNC and recording settings to match their own policies and the rules in their jurisdiction. DialerBee provides compliance-supporting controls and does not provide legal advice. For the wider picture of dealership calling, read our automotive dealership calling guide.

Häufig gestellte Fragen

What should a recall outreach call cover?

Keep it to four things: say who you are and why you are calling, confirm the owner and vehicle details are current, check whether the vehicle has any other open recalls, and book the repair or hand the owner to someone who can. The manufacturer script used as a model in this guide follows exactly that order: confirm name, address, phone, email and vehicle status, mention other open recalls, then warm-transfer to the nearest authorised dealership for an appointment.

Who contacts owners about a recall: the manufacturer or the dealer?

In the UK, GOV.UK says that if a vehicle has a serious safety defect the manufacturer will write to the owner to tell them what to do. In the US example used in this guide, the manufacturer's own recall team makes the outreach calls and sends the owner to a local dealer to book. A dealer can then follow up with owners on its own list. Your own role depends on your manufacturer agreement, so check what your brand expects of you.

What should a recall voicemail say?

Say who is calling, that a safety recall or service is due on the owner's vehicle, that the repair is free where that is true for your brand and market, and exactly how to book: a phone number, a link, or both. Keep it short and avoid personal detail you would not want a household member to overhear. The manufacturer voicemail in the NHTSA-hosted script also asks the owner not to delay.

How many times should I retry an owner I cannot reach?

There is no universal number. Set a small cap, spread the attempts across different days and times of day, add a message with a booking link between calls, and stop at once when the owner says they have sold the car or asks not to be called. Treat any figure you read elsewhere as a starting point to test on your own list, and check the calling rules that apply to you.

How do I measure recall outreach?

Use three rates with stated denominators: appointment set rate is appointments booked divided by owners contacted, show rate is appointments kept divided by appointments booked, and completion is recall repairs completed divided by open recalls on your owner list. Report them separately because each one points to a different fix: the call, the reminder, or the workshop capacity.

Can the same call flow be used for ordinary service reminders?

Yes. A maintenance-due, declined-work or first-service reminder uses the same shape: who is calling, what is due, confirm the details, offer a slot. The differences are tone and cost. A service reminder may count as a marketing contact, so check consent and marketing rules for your market, while a safety recall is a safety notice.

Quellen

  1. Hyundai General Recall - Voicemail and Outreach Scripting, document RCRN-21V00M-9335, NHTSA recall documents. static.nhtsa.gov, RCRN-21V00M-9335 (geprüft am 19.11.2026)
  2. GOV.UK, Check if a vehicle has been recalled. gov.uk/check-vehicle-recall (geprüft am 19.11.2026)
  3. GOV.UK, Vehicle recalls and faults. gov.uk/vehicle-recalls-and-faults (geprüft am 19.11.2026)

Weiterführende Lektüre

Haftungsausschluss: This article is general information, not legal advice. DialerBee does not provide legal advice or guarantee regulatory compliance. The scripts and numbers are illustrative. Rules on calling vehicle owners, consent, recording and recall notices differ by country and by manufacturer, so confirm your obligations with qualified advisers and your manufacturer before you run a campaign.

Weiterführende Lektüre: How to Reduce No-Shows With Reminder Calls

Bereit, DialerBee in Aktion zu sehen?

Fordern Sie eine 15-minütige Live-Demo an oder starten Sie eine 14-tägige kostenlose Testphase – ohne Folien, ohne Verpflichtung. Das Telefonieren beginnt, sobald Ihr eigener SIP-Trunk oder Ihre TK-Anlage verbunden und freigegeben ist.

14-tägige kostenlose Testphase · kostenloses KI-Guthaben · keine Kreditkarte · 11 Sprachen · BYOC · Kontrollen zur Unterstützung der Compliance

Vollständige Website auf Englisch ansehen →