What Is VoIP QoS? Quality of Service
VoIP QoS (quality of service) gives voice packets priority on a network so calls avoid delay, jitter and loss. Learn DiffServ, DSCP EF 46 and where to use it.
Resposta rápida
VoIP QoS (quality of service) means giving voice packets priority over other traffic so calls see low delay, jitter and loss. The usual method is DiffServ: voice packets are marked with the Expedited Forwarding code point, DSCP 46, and network devices that honour the mark place them in a priority queue.
A voice call is a steady trickle of small packets that must arrive on time. A large download is the opposite: it is happy to wait. When they share a congested link, the download can crowd the call out. QoS is how you tell the network which traffic comes first.
What is VoIP QoS?
QoS is a set of techniques that treat different traffic differently. For VoIP the goal is the one RFC 3246 states for Expedited Forwarding: a building block for low-delay, low-jitter and low-loss services. It does not add bandwidth. It decides who waits when bandwidth runs short.
Why do voice packets need priority?
Real-time audio is sensitive to three things:
- Delay. Late audio makes conversation awkward. See latency. ITU-T G.114, titled One-way transmission time, is the recommendation on delay, and its amendments include guidance on one-way delay for VoIP.
- Nervosismo. Uneven spacing is heard as choppy speech. See jitter.
- Loss. Missing packets are heard as gaps. See packet loss.
RTP, which carries the audio, does not guarantee timely delivery or quality of service on its own (RFC 3550), so the network has to supply it.
How does DiffServ QoS work?
- Mark. The phone, softphone or a network device sets a code point, the DSCP, in each packet's IP header.
- Classify. Routers and switches along the path read the mark.
- Queue. Marked voice packets go into a priority queue that is served at a configured rate, ahead of ordinary traffic.
- Limit. The priority traffic is capped so it cannot starve everything else.
- Verify. Measure delay, jitter and loss to check that the marks are honoured. See how to measure VoIP call quality.
Which DSCP value should voice use?
RFC 4594 gives configuration guidelines for DiffServ service classes. Its Telephony class uses Expedited Forwarding, binary 101110, which is decimal 46. It says the class should get guaranteed forwarding resources so packets are forwarded quickly, and its summary table lists no active queue management for the Telephony class. Call signalling has its own class.
| Traffic | Service class (RFC 4594) | DSCP | Per-hop behaviour |
|---|---|---|---|
| Voice audio (RTP) | Telefonia | EF, binary 101110 (46) | Expedited Forwarding (RFC 3246) |
| Call signalling (SIP) | Signaling | CS5, binary 101000 (40) | Class Selector (RFC 2474) |
These are recommended defaults. Your own network team may choose differently, provided every device along the path agrees.
Where does QoS help, and where can it not help?
QoS only works at devices that read and act on the mark. That makes the following useful:
- Your LAN and your Wi-Fi. The office or home network, where one connection is shared. Prioritising voice here is often the cheapest fix.
- Your router at the internet link. Where your traffic queues to leave your network.
Beyond your own network, on the public internet, no one guarantees that other networks will honour your mark. QoS cannot repair a congested or unreliable path you do not control. For browser agents, check audio problems with the WebRTC agent audio guide.
What is a practical checklist for an agent's network?
- Use a wired connection where possible. Wi-Fi is shared and varies more.
- Check whether the router has a voice or real-time priority setting and turn it on.
- Keep large uploads and downloads away from call hours.
- Measure a few calls. Look at jitter and packet loss, not only speed.
- If the problem remains, test on a different network to see whether it follows the agent or the line.
Perguntas frequentes
What is QoS in VoIP?
QoS is a way to give voice packets priority on a network so calls see low delay, jitter and packet loss, usually by marking the packets and queueing them ahead of other traffic.
What is DSCP 46?
DSCP 46 is the decimal value of the binary code point 101110, Expedited Forwarding. RFC 4594 recommends it for the Telephony service class.
What is Expedited Forwarding?
Expedited Forwarding (EF) is a DiffServ per-hop behaviour defined in RFC 3246 to support low-delay, low-jitter and low-loss services.
How do I set QoS for VoIP calls?
Mark voice packets at the phone or softphone if it supports it, have your router and switches prioritise that mark, and check results with call-quality measurements.
Does QoS help remote call-centre agents?
It can help on the agent's own network, such as a home router or office Wi-Fi. It cannot control other networks on the internet path.
Fontes
- RFC 3246, An Expedited Forwarding PHB, March 2002 (fonte, verificada em 2026-11-19)
- RFC 4594, Configuration Guidelines for DiffServ Service Classes, August 2006 (fonte, verificada em 2026-11-19)
- ITU-T G.114, One-way transmission time, 05/2003 (fonte, verificada em 2026-11-19)
- RFC 3550, RTP: A Transport Protocol for Real-Time Applications (fonte, verificada em 2026-11-19)
Leitura relacionada: Jitter · Packet loss · Latency in VoIP · MOS · How to measure VoIP call quality · WebRTC agent audio problems
Termos relacionados
What Is VoIP? Voice over IP Explained
VoIP (Voice over IP) carries phone calls as data packets over IP networks instead of copper circuits. How it works, SIP and RTP, and what shapes call quality.
What Is Word Error Rate (WER)?
Word error rate (WER) scores speech recognition by comparing its output to a correct transcript and counting substitutions, deletions and insertions.
O que é um Contact Center BPO?
Um contact center de BPO opera chamadas em nome de empresas clientes. O modelo exige isolamento de tenant, regras por cliente, marca e relatórios.
O que é um registro detalhado de chamadas (CDR)?
A call detail record logs who called whom, when, how long and how the call ended. See what a CDR holds, how teams use it, and how it differs from a recording.
O que é o status de uma chamada?
A disposição é o resultado codificado que um agente registra ao fim de um contato. Veja como os códigos são criados, por que mudam e o que depende deles.
What Is a Data Processing Agreement (DPA)?
A data processing agreement (DPA) is the contract GDPR Article 28 requires between a controller and a processor. Learn what it must cover for call recordings.
Pronto para ver DialerBee em ação?
Solicite uma demo ao vivo de 15 minutos ou comece um teste grátis de 14 dias — sem slides, sem compromisso. As ligações começam assim que o seu próprio SIP trunk ou PBX estiver conectado e aprovado.
Teste grátis de 14 dias · crédito de IA gratuito · sem cartão · 11 idiomas · BYOC · controles de apoio à conformidade